AL-Sealing M/C, Screw Capping M/C

Home > PRODUCTS > AL-Sealing M/C, Screw Capping M/C

HD-MFE

Automatic Aluminum
Cap Sealing Machine

알루미늄 실링기

In HD-ACS, when the container comes to the sealing position by the feed star wheel through the entry conveyor and entry screw, the cap is covered by the cap chute and the central main sealing knife enters into the rotating bottle and the bottom of the cap in order to seal the bottom of the cap smoothly and beautifully.

In the existing method, the sealing knife is fixed, so there is sealing defect caused by the shaking of the container due to the vertical movement of the bottle. To compensate for it, while the rotary plate mounted on the bottom of the container rotates, our sealing knife in the center of the facility do the first and second entry into the bottom of the cap to ensures perfect sealing as well as clean and smooth sealing on the surface.

The facility is a facility that seals the cap on the vial to prevent external contamination and safely protects the product from leakage

소용량 (1ml~20ml)

Small capacity (1ml~1,000ml)

대용량 (100ml~1,000ml)
Dust Partical Suction System

Fine Dust Suction System during sealing

Dust Partical Suction System

In the process of sealing, the fine dust generated when the knife enters the rotating container is sucked into vacuum facility of dust collection in order to minimize particles and contamination that may occur in the sealing machine.

CHARATERISTICS

  • Safety & Perfect Sealing
  • Perfect sealing by entering sealing knife located in center through its 1st & 2ndmovement in and out
  • Height adjustable for different bottle sizes.
  • A system that discharges particles generated from the contact surface between the cap and the knife to the outside of the suction.
  • Easy cleaning and change parts
  • In compliance with GMP regulations.

SPECIFICATION OF HD-ACS

Type Suitable Size Output Sealing Head Net Weight Overall Dimensions
HDACS-100 1~500ml
(Vial, Bottle)
6,000 ~9,000pcs/h 6Head 1,200kg 1,100 X 1,600 X,2,100 mm
HDACS-200 12,000 ~ 15,000pcs/h 8Head 1,300kg 1,200 X 1,650 X2,100 mm
HDACS-300 18,000 ~ 20,000pcs/h 10Head 1,500kg 1,300 X 1,700 X2,100 mm

HD RC series is an automatic continuous motion capping machine with rotating capping section to ensure smooth transportation of containers and closures. Permanent magnet type capping chuck combined with separate drive ensures safe and secure capping in all conditions. HD Pack Capping Machine combines a flexible and economical solution to design a complete line and different size capping and large capacity container format.

ROTARY SCREW CAPPING MACHINE (스크류 캡핑기)

ROTARY SCREW CAPPING MACHINE
HD-RC SERIES Rotary Screw Capping Machine
(High speed)

ONE HEAD CAPPING MACHINE (원헤드 캡핑기)

ONE HEAD CAPPING MACHINE
One Head Capping Machine
(Low speed)

Screw Capping Machine Part

ROPP Capping Machine Part